Description

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension's XSB003 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty, solid 38mm bar stock, the XSB003 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection.

BMR Suspension designed the XSB003 sway bar for street performance, autocross, and road race applications. The large adjustable sway bar's three positions give you the versatility to drive to and from the road course or autocross and still out handle the competition with the same sway bar. The rate increase allows you to fine-tune the handling characteristics of your B-body so you can drive harder through corners with minimal body roll. The XSB003 attaches to your B-body with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. The solid design gives you loads of strength, allowing for more body roll control, which equals more traction and consistent launches. When performance is a must, rely on BMR Suspension!

BMR Suspension's XSB003 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!

Features

- Fits 1991-1996 GM B-body
- Designed for street performance, autocross, drag race, and road race applications
- Dramatically reduces body roll
- Cold formed to better resist torsional fatigue
- Manufactured from solid 38mm heavy-duty bar stock for increased strength
- Durable powdercoat finish
- 1-hour installation time
- Proudly designed in the U.S.A.
- Proudly made in the U.S.A.

Applications

1991 - 1996 Chevy Impala SS

1991 - 1996 Chevy Caprice

Available Colors

Black Hammertone		Red

Related Kit/Combos

View Details	Sway Bar Package (SB006, XSB003)
		The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because th ... $549.00 Part#: SBP006 Application: 1991 - 1996 B-Body