Description

Reduce weight, increase frontend rigidity, and swap a Small-Block or Big-Block Chevy engine into your F-body with a Tubular K-members from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-5/8-inch x 0.120 wall and 1-1/4-inch x 0.095 wall DOM tubing, BMR's K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment. The K-members are built with provision for either factory or manual steering racks.

Designed for street performance, drag race, and road race applications, BMR Tubular K-members drop weight and add loads of structural rigidity. BMR's unique K-member design features integrated frame stands that replace the factory cast iron frame stands. This additional weight reduction allows us to use larger diameter tubing and thicker mounting plates for additional strength over other companies' K-members. When combined with BMR's upper and lower A-arms, a minimum weight reduction of 42 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable. The K-member also comes with specially designed engine mounts allowing you to easily swap a SBC or BBC engine into your Fourth Gen F-body with no fabrication.

BMR Suspension's KM015 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours. Proudly made in the U.S.A.!

Features

- Designed to fit 1993-2002 GM F-body
- Designed with extra room for turbo applications
- Lighter than other competitors K-members due to integrated motor mount design
- Built from heavy-duty 1-5/8-inch x 0.120 wall and 1-1/4-inch x 0.095 wall DOM tubing
- Additional ¼-inch of A-arm adjustability provides up to 4 degrees of additional camber adjustment
- Works with stock A-arms or any aftermarket A-arms
- Designed with engine mounts for SBC/BBC
- Designed for stock steering rack
- Designed for street performance, drag race, and handling applications
- Durable powdercoat finish
- 4-5 hour installation time
- Proudly designed in the U.S.A.
- Proudly made in the U.S.A.

Applications

1993 - 2002 Chevrolet Camaro

1993 - 2002 Pontiac Firebird

Available Colors

Black Hammertone		Red

Videos